Down product purchase tips

Apr 01, 2020

Leave a message

Take a look: See if the product is marked with a trademark or other product, according to what standard is it produced, what type of down filler, etc., to ensure that it is not a "three-free product". In this case, if there is a problem with this product, you can also find a merchant to protect your rights.

Second touch: Feel the softness by touching directly. When you touch it, you should make the product feel flat and resilient, and let it recover naturally for 3 minutes to see if the product rebounds quickly and returns to its original state. If it does not rebound or the rebound is very slow and low, it means that the quality of the filler is not good; if there is no resilience at all, the filler is likely to be chicken feathers or other long hair pieces of scattered hair instead of down.

Three beats: Beat the product vigorously to see if there is any dust overflow. If there is no dust overflow, it is a good product; if there is dust overflow, it is made of crushed wool or gray sand wool, which is generally not suitable for wearing.

Four kneading: knead it against the light source to see if there is dust and small flying hairs, and if there is any drilling down. If there are small hairs drilled out of the fabric, or from the stitches, it means that the product has insufficient fleece density.

Five smells: sniff if there is any smell, if there is a smell, it means that it is produced by an informal manufacturer.

Six slaps: Squeeze the weight of the product by hand, and look at the size of the volume at the same time. The lighter the weight, the larger the volume, the better. With a velvet content of 30%, the same weight volume should be more than 1 times that of cotton; with a velvet content of 70% or more, the volume is more than 2 times that of cotton.